作為新興壓力變送器的一種，智能壓力變送器在市場上的應用前景越來越好。智能壓力變送器能夠迅速搶占市場的重要原因就在于，與傳統壓力變送器相比，它的性能優勢表現的更為明顯，主要可以概括為測量精度準、穩定性能良好、使用方便等等。為此，我們必須對這類變送器在濕度方面的測量方法有一定程度的了解，這樣可以大大提高智能壓力變送器的測量效率。

       As an emerging pressure transmitter,the application of smart pressure transmitters in the market is getting better and better.The important reason why the intelligent pressure transmitter can quickly seize the market is that its performance advantage is more obvious than that of the traditional pressure transmitter.It can be summarized as accurate measurement accuracy,good stability,easy to use,etc..To this end,we must have a certain degree of understanding of the humidity measurement methods of such transmitters,which can greatly improve the measurement efficiency of intelligent pressure transmitters.

       一、露點測量法

       First,dew point measurement method

       所謂露點測量法，指的是智能壓力變送器對濕空氣達到飽和狀態時的溫度進行測量的方法。這種測量方法，主要利用了熱力學的相關原理。它的優點在于，測量結果的準確性高、測量的范圍較廣。但是這種測量方法的缺陷就在于，投入成本過大，且需要與相關儀器進行配套使用，增加了測量的操作難度。

       The so-called dew point measurement method refers to the method of measuring the temperature of the wet air when the wet air reaches saturation.This measurement method mainly utilizes the relevant principles of thermodynamics.Its advantages are that the measurement results are highly accurate and the measurement range is wide.However,the drawback of this measurement method is that the input cost is too large,and it needs to be used in conjunction with related instruments,which increases the difficulty of measurement.

       二、干濕球測量法

       Second,dry and wet ball measurement

       這種測量濕度的方法出現的時間很早，因而也是應用較多的一種。實際上，它屬于間接測量方法的一種。與露點測量法相比較，它的準確性要低上很多。

       This method of measuring humidity occurs very early and is therefore one of the more widely used.In fact,it is one of the indirect measurement methods.Compared with the dew point measurement method,its accuracy is much lower.

       三、飽和鹽法

       Third,the saturated salt method

       它屬于靜態法的一種，也是對濕度進行測量的方法中較為常見的一種，具有操作簡便的特點。但是，當智能壓力變送器用于濕度測量時，它對液體、氣體的平衡性要求是十分嚴格的。因而，會花費大量的時間在濕度平衡這一點上。

       It is a kind of static method,and it is also one of the more common methods for measuring humidity,and it has the characteristics of simple operation.However,when a smart pressure transmitter is used for humidity measurement,its balance of liquid and gas requirements is very strict.Therefore,it takes a lot of time to balance the humidity.

       四、雙壓法及雙溫法

       Four,double pressure method and double temperature method

       智能壓力變送器對濕度的測量，主要利用了熱力學中關于P、V、T三者的平衡遠離。這種測量方法與飽和鹽法一樣，需要花費很長的時間進行干、濕空氣的平衡。但是，與干濕球測量法不同的是，由于應用了現代測量技術，因而在測量精準度上要高的多。但是，它.大的弊端就體現在相關設備的制造上，不僅制造流程復雜，而且制造成本高，耗費的人力、物力都是很大的。

       The measurement of humidity by the intelligent pressure transmitter mainly utilizes the balance of P,V and T in thermodynamics.This measurement method,like the saturated salt method,takes a long time to balance the dry and wet air.However,unlike the dry-wet ball measurement method,the measurement accuracy is much higher due to the application of modern measurement techniques.However,its biggest drawback is reflected in the manufacture of related equipment,not only the manufacturing process is complicated,but also the manufacturing cost is high,and the labor and material resources are very large.

        西安華恒儀表變送器廠家研發出傳感器和智能電路板兩項核心技術，不僅所有產品的核心部件技術全部掌握，工業自動變送器廠家的精確度也在不斷提高，由0.2級提高到0.1級。還可通過對所掌握核心技術進行延伸，變形出測流量、測溫度的其他產品。

       Xi'an Huaheng Instrument Transmitter Factory has developed two core technologies:sensor and intelligent circuit board.Not only the core components of all products are mastered,but the accuracy of industrial automatic transmitter manufacturers is also increasing,from 0.2 to 0.1.level.It can also be extended to other products that measure flow and measure temperature by extending the core technology.

       華恒變送器廠家憑借自身?yè)碛械膫鞲衅骱椭悄茈娐钒搴诵募夹g(shù)，可以根據客戶要求，低成本對核心技術進行延伸變形，實現個性化產品定制。主要產品有SMART（斯瑪特）系列壓力變送器、多參數變送器、流量器、溫度傳感器和物位（液位變送器廠家，為我國電力、石油、化工、冶金、水泥、礦業等行業提供了高性能價格比的工業自動變送器廠家產品。

       With its own sensors and intelligent circuit board core technology,Huaheng transmitter manufacturers can extend and transform core technologies according to customer requirements and achieve personalized product customization.The main products are SMART(Smart)series pressure transmitter,multi-parameter transmitter,flow meter,temperature sensor and level(liquid level transmitter manufacturer,for China's power,petroleum,chemical,metallurgy,cement,mining The industry provides high-performance and price-effective industrial automatic transmitter manufacturers.